1·Note automatic leak control arm cylinder valve and locked balance valve.
说明内泄出自动臂缸的控制阀及锁死平衡阀。
2·That is the background of balance valve and automatic valves been produced.
水力 平衡 装置正是在这种背景下产生的。
3·The balance valve circuit is to support the weight of platen and plunger design.
回路中的平衡阀是为支撑压板及柱塞的重量而设计的。
4·Presents the balance valve make-up water pressurization method used in substation reformation.
介绍了在换热站改造中采用的平衡阀补水定压方式。
5·ZWB222 series hydraulic balance valve for finishing hydraulic balance during all offshoot loop of one system.
ZWB222系列水力平衡阀用于完成一个系统中各分支回路间的水力平衡。
6·Single cylinder with imported balance valve for front support elevation hoist down by gravity low energy consumption.
单缸前支前幅，重力下降，能耗低，进口平衡阀。
7·This utility model is characterized in that: seal rings are set in the spool and shell of the aforesaid balance valve.
其特征在于，在上述 平衡阀内芯和平衡阀外壳上均设有密封圈。
8·Discussed the pump pressure, installation of the balance valve and the design effectiveness of reversed return water system.
对水泵压力、平衡阀的设置、系统同程设计的有效性等作了初步的讨论。
9·Through experiment, achieved the relation of the flux and the opening degree of the SPF balance valve, protracted the ideal flow characteristic curve.
通过实验，得到了SPF型平衡阀的流量与开度间的关系，绘制了理想流量特性曲线。
10·By changing the balance valve spool of the flow area to adapt to the changes before and after the valve, so as to achieve the purpose of flow control.
通过改变平衡阀的阀芯的过流面积来适应阀门前后的变化，从而达到控制流量的目的。